Home Industries Mining

Mining

Mining

Rubber Products for Mining Industry Equipment

UMABOND makes rubber products for mining industry equipment, including anti-vibration mounts, rubber springs, rubber isolators, rubber buffers, rubber beadings, and silicone tubes and profiles. These industrial rubber products for mining soak up vibration and impact, cut noise, and protect the machine from wear.

We make them in our own plant in Ahmedabad, Gujarat, and we’ve been doing it since 1991. Send us a drawing, or just a worn-out part, and we’ll make one to match.

UMABOND Rubber Products for Mining

Rubber Components for Mining Equipment

Mining machines get hit by heavy loads, constant shaking, and a lot of dust. When a mount cracks or a buffer gives up, something else starts to take the damage. These are the rubber parts for mining machinery that we make to stop that.

Anti-Vibration Mounts

Used on: Crushers, vibrating screens, generators, compressors, pumps [confirm uses]

A mount sits between the machine and the floor or frame it stands on. It takes up the shaking, so less of it travels into the structure and the machines around it. Less vibration means less noise and fewer loose bolts.

Benefits:
Cuts vibration, reduces noise, protects the machine and its base
Specs:
Load capacity [ ] · Material · Hardness Shore A · Size

Rubber Springs

Used on: Vibrating screens, feeders, heavy equipment suspension [confirm uses]

A rubber spring does the job of a metal spring, but it also damps the movement and doesn’t squeak or rust. It handles heavy loads and repeated bouncing without the harsh noise.

Benefits:
Carries heavy loads, damps movement, quiet in use
Specs:
Load capacity [ ] · Material · Hardness Shore A · Size

Rubber Isolators

Used on: Engines, motors, control cabins, small equipment [confirm uses]

Isolators keep vibration from reaching the parts that don’t like it, such as control panels, cabins, and electronics. They’re usually smaller than mounts and fit where space is tight.

Benefits:
Shields sensitive parts, reduces noise, easy to fit
Specs:
Material · Hardness Shore A · Size

Rubber Buffers

Used on: Conveyors, loading equipment, hoppers, and end stops [confirm uses]

A buffer is a soft stop. When something heavy reaches the end of its travel, the buffer takes the hit instead of the steel. That means less noise and less damage to the frame.

Benefits:
Absorbs impact, reduces noise, and protects equipment.
Specs:
Material · Hardness Shore A · Size

Rubber Beadings

Used on: Machine covers, cabin doors, panels, and enclosures [confirm uses].

Beading is a shaped strip that fits along an edge or a joint. It seals the gap against dust and water and protects the edge from knocks.

Benefits:
Keeps dust out, protects edges, easy to fit
Specs:
Material · Profile shape · Length · Colors

Silicone Tubes and Profiles

Used on: Air and fluid lines, seals on panels and enclosures, high-heat areas [confirm uses]

Silicone handles heat and cold better than most of the rubbers. Our platinum-cured silicone tubing works from -60°C to +250°C. Profiles can be made in solid or sponge form to seal covers and doors.

Benefits:
Handles heat and cold, flexible, long life
Specs:
Material · Hardness Shore A · Inner and outer diameter · Profile shape

Rubber Sealing Gaskets for High-Pressure Mining Pumps [confirm before publishing]

Used on: Slurry pumps, water pumps, hydraulic systems

Pumps in mining push heavy, gritty fluid at high pressure, and a weak gasket is the first thing to leak. We choose the rubber for what the gasket has to face, such as water, oil, or abrasive slurry, and make it to your pump’s size.

Benefits:
Reliable sealing, built for pressure, made to fit
Specs:
Material · Pressure rating [ ] · Temperature range · Size

Quick Specs at a Glance

Product Common use Material Hardness (Shore A) Size range Made to order?
Anti-vibration mounts
 Under crushers, screens, generators [ ] [ ] [ ] Yes
Rubber springs
 Screens and feeders [ ] [ ] [ ] Yes
Rubber isolators
 Engines, cabins, small equipment [ ] [ ] [ ] Yes
Rubber buffers
 End stops, hoppers, conveyors [ ] [ ] [ ] Yes
Rubber beadings
 Covers, doors, enclosures [ ] [ ] [ ] Yes
Silicone tubes and profiles
 Fluid lines, high-heat sealing [ ] [ ] [ ] Yes
Pump sealing gaskets [confirm]
 High-pressure pumps [ ] [ ] [ ] Yes

How to Choose the Right Rubber

A few questions get you most of the way there.

01

How heavy is the load?

Heavier machines need harder, thicker rubber.

02

How bad is the shaking?

A vibrating screen and a generator don’t need the same mount.

03

What does it touch?

Oil, water, and abrasive slurry can all wear some rubbers faster.

04

How hot or cold does it get?

Every rubber has a temperature range it likes.

If you can’t answer these, send us a photo or the old part. Our engineers will take it from there.

WhatsApp an Engineer

Why Choose UMABOND for Mining?

Made to your drawing or sample

We build our own tooling, so odd sizes and shapes are fine.

Checked before it ships

Every order is inspected at our plant before it leaves.

We mix our own rubber

The part you reorder next year will match the one you got today.

Quick turnaround

[90%] of standard orders leave our plant within [24 hours].

Experience

We’ve been making rubber products in Ahmedabad since 1991 and supply customers across India.

Need a rubber part for your mining equipment?

Send us a drawing, sample, or part number. We’ll get back to you with a quote within [1 working day].

Request a Quote Chat with an Engineer

Frequently Asked Questions

Mining machines commonly use anti-vibration mounts, rubber springs, isolators, buffers, beadings, and silicone tubes. They cut vibration and noise, absorb impact, and keep dust out. We make all of these, so you can get mining industry rubber products from one plant.

Both reduce vibration. A mount usually carries the weight of a machine and sits under it. An isolator is generally smaller and protects a specific part, such as a cabin or control panel, from shaking. If you’re not sure which you need, send us the details and we’ll suggest one.

These machines usually need anti-vibration mounts or rubber springs to carry the load and damp the movement and buffers at points where parts hit a stop. The right size depends on the weight and the force involved. Tell us the machine and we’ll recommend [material].

Yes. We make gaskets to your pump’s size, in rubber chosen for the fluid and pressure it will face. Send us the old gasket or a drawing, along with the pressure and fluid, and we’ll quote it [list rated pressure].

Yes. Send a drawing, a sketch with sizes, or the worn-out part. We make the tooling here and quote the part. Quite a few customers come to us because their old supplier stopped making a part.

Our minimum order is [ ] pieces. About [90%] of standard orders go out within [24 hours]. Custom parts take [ ] days because the tooling has to be made first. Give us your quantity and deadline when you ask for a quote.

Tell us what your equipment needs.

We’ll help you pick the right part and send you a quote.

Request a Quote Call +91 9099220485 WhatsApp an Engineer
Chat with Engineer